I’m leaning towards Arlo Pro 2 over the Arlo Q, due to the portability – however, since the portability is only a plus for me and not a must, is there any advantage that the Q has over the Pro 2 that I may want to consider before making my final decision. [I tried finding differences between the Arlo Q and Arlo Pro 2, and, aside from the design & portability, I was unable to find any.] If you know of any can you please share with me, and then I’ll be 100% certain in my decision:)
P.S. My house was broken once when we was abroad, without breaking a door or a window. In fact, the thieves entered thru the front door without breaking anything – the lock was just magically opened. Because we know we didn’t lose any key, the assumption is that they used lock picking technique or a lock picking gun (https://en.wikipedia.org/wiki/Snap_gun) – So I don’t think it’s good to assume thieves are dumb (But i’m not in the USA so maybe you have different kind of thieves ;-] )..
The Ring Alarm system does not include fire or carbon monoxide monitoring – for those features, you’ll need to add a First Alert Z-Wave Smoke/CO alarm ($40) or Ring’s Alarm Smoke and CO listener ($35) that gets installed next to your existing smoke alarms and “hears” when they go off to trigger the system. I was not able to test these products for this review.
We put these products side by side to give you a comparison of what each one offers, along with a rundown of their similarities and differences. Read on for Ring Alarm vs. Nest Secure: an in-depth look at two of the best home alarm systems on the market. And for a close look at each system one by one, be sure to check out our full review of the Ring Alarm, as well as our full review of the Nest Secure.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
1. Correct. Geofencing is a free feature. I’m not sure what abode uses specifically, but generally, geofencing does require GPS or location services to be enabled. I know the system doesn’t use Bluetooth. My dad is using the system right now and he’s had problems with multi-user geofencing. I asked abode about it, but they just wanted to troubleshoot instead of discussing general performance. If I were to guess, I’d guess that it’s only using GPS to detect presence and not a combination of data like GPS and phone presence (Wifi).
Once the base station is online and your account set up for monitoring, the rest of the devices in your starter kit are automatically identified in the Ring app and you can set them up one by one. With each one, you can provide a name and room location to help identify the accessories in notifications and the app. With the keypad, you'll set up an access code that lets you arm and disarm the alarm, and you can set up different codes for different people. As you set up each motion detector and contact sensor, the app will have you test each one to ensure that they're probably detecting events.
It’s not ideal, but it’s not terrible. I just went out there and stood sideways to the camera and you could still see me. The farther back I stood, the better the picture. Take a look at the article and scroll all the way to the bottom. I put two pictures up temporarily. Let me know once you see them as I’m going to take them down. I suggest buying it and testing it out using the battery by placing it where your current doorbell is BEFORE you actually install it. If you think it will work, go for it. If not, send it back.
Thanks Rose for this update! Not familiar with Kuna and will check them out via your link. Have been continuing to research the best outdoor option. Surprised that none of the major brands in your side-by-side can be used in colder regions – seems like that eliminates a lot of potential customers. Glad I found your review and keep up the great work in this space – very helpful!
Ha! That’s funny. Anywho, Arlo. Yes, Arlo needs the base station. The cameras only talk to the base station which creates its own network. The max range is stated at 300ft between base station and camera, which I assume is direct line of sight. If I had to guesstimate the distance between my base station and camera I would say 50 feet max? I haven’t tested beyond that.
When we tested out the accuracy of the motion and contact sensors, we were impressed with how quickly our app registered movement. Opening the door meant that our app automatically showed the “faulted” icon indicating movement – in fact, it was almost instantaneous. Same for the motion detection sensor – the notification on both the hub and the app appeared almost immediately. This was the case whether we were in the house or not. With some devices we’ve tested, particularly with security cameras, there’s often a lapse with notifications. It doesn’t appear to be the case here.
How far away would the two doors be from an available Ethernet outlet? My thought is that you could use a system where the cameras actually talk to the base station, not the internet. Arlo, for example, uses cameras that talk to the base station directly. When the base station is plugged into Ethernet, it creates its own WiFi network which the cameras connect to directly versus connecting to your home network. The hard part would be that the base station needs to be in a central location between the two doors and, as I stated, connected using Ethernet. In a perfect world, you can place the Arlo cameras up to 300 feet away from the base station, but lots of things can obstruct their ability to talk to the base like walls and doors.
The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
Welcome to the most versatile and rugged wireless Welcome to the most versatile and rugged wireless IP camera on the market. The Lorex Super HD Outdoor Wi-Fi Security Camera is the complete package. It is full of industry leading features such as 4MP (Megapixel) video resolution high powered infrared LEDs for 60 ft. night vision ultra-wide angle viewing ... More + Product Details Close
While having a couple of power/connection options already provides flexibility, there is even more flexibility thanks to accessories (sold separately). The first accessory is a Secure Mount that locks your device into place. Replacing the magnetic base, it helps prevent device theft. The second is the Stake Mount: Stick the mount into the ground or a potted plant to give Flex a hidden camera effect. Third is the Twist Mount, which can bend and wrap around an object so that you can hang it virtually anywhere. Canary suggests using it to place Flex on fixtures, railings, or even branches.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.