This one is for anyone who lives in a medium to large size house. The Ring Chime Pro boosts the Wi-Fi signal from your router so that even your most remote Ring devices are supported. This also amplifies any notifications they send. Most users have found that this significantly improves the strength of their doorbells, which makes sense as the front door is often far away from your living room or office. Possibly the simplest item to install on this list, simply plug the Ring Chime Pro into a wall outlet and you’re good to go.
Yes, I’m looking for an ecosystem that provides cloud-based mobile access to security video in a reasonably low cost package. However, I don’t want WiFi cameras, because I don’t want the bandwidth burden on the WiFi when I already have CAT6 cables to each camera location and I already have a POE switch. I don’t need a doorbell at all, just the cameras.
I love the Ring Video Doorbell, but I’m not a huge fan of their other cameras. However, the wired version of Ring Spotlight works in temperatures ranging from -20°F to 120°F, which makes it an interesting choice for you. I also like my Nest Hello. Nest Cam IQ Outdoor can work in temperatures ranging from -40° to 113°F. That said, if you are opening to drilling during your construction project, which I assume you are, I would recommend exploring PoE cameras, which is a category I need to dig into more. If you go this route, you would more than likely have one app for your cameras and another for your doorbell. As a side note, Ring Video Doorbell Elite is a PoE option.
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
If the base station is the control center for your Ring devices, then the Amazon Echo Show is the main stage. This 10.1-inch HD screen with built-in speakers was practically made to complement your home security system. Set it up in the kitchen or living room, and you’ll be instantly connected to video and notifications from around your home. Someone at the door but you’re making dinner? Use the Amazon Echo Show to see who’s arrived. In addition to syncing with cameras and alarms, it can even listen for the sound of smoke detectors or broken glass. Talk about a smart security product.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Installing the Ring Alarm system is easy thanks to the well-written getting started guide. I already had a Ring account, but if this is your first ring device, start by downloading the Ring app and creating one. I opened the app and tapped Add a Ring Product, selected Alarm from the list, and confirmed my location. I plugged in the base station and pressed the pairing button, which started the blue LEDs spinning, indicating that the station was in pairing mode. I tapped Find My Base Station in the app and selected Wi-Fi as my internet connection method (you can connect via Ethernet or Wi-Fi), selected my router's SSID, and entered my Wi-Fi password. The LEDs flashed white momentarily before turning solid blue and the Wi-Fi indicator turned green, indicating a successful pairing. The app also confirmed the connection.
Continuous Recording No. Records based on event. Yes, but the camera must be plugged-in which requires that you leave it inside. 14 days of 24/7 CVR starts at $9.99/month/camera Coming soon (Spring 2019). Will require a Ring Protect subscription. Coming soon (Spring 2019). Will require a Ring Protect subscription. Yes, will record 24/7 with paid Nest Aware plan. No. Records based on event.
3. Both Arlo and Nest have a lag from time to time. There are moments when I pull out my phone to stream Nest and it just spins and spins. I have to hard close it and then reopen the app. When it’s working, I can usually access footage in about 4 seconds. Arlo takes about 8 seconds to wake. There is also a 4 second difference between what you see on your phone and what’s happening in real life. WiFi will really depend on the speed and quality of your internet connection at home. I would suggest performing a quick test to see your current upload/download speeds.
Once these motion-activated cameras pick up on movement, they’ll turn on their built-in floodlights, start recording, and send an alert to your connected mobile app. From there, you’ll be able to see and hear what’s going on via the camera feed, as well as speak through the cameras to whoever is on the property. You can also customize alert zones to narrow in on the most important areas for motion detection. All of this can be done from anywhere, which means you can keep an eye on your home even while you’re away.
Arlo Go is yet another Arlo camera. It’s an Arlo Pro plus 4G. The big catch is that a cellular plan via Verizon is needed as it doesn’t work with WiFi. It does come with 15 data minutes to send 15 minutes worth of video to the cloud for free. Once you’ve used those minutes, you’ll need to buy more time. Data plans start at $4.99/month for 15 data minutes and go up to $32.99/month for 225 data minutes. Arlo Go sells for $429.99 on Amazon or 399.99 from Verizon ($349.99 if you sign a 2-year contract).
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
The Ring system offers many different types of cameras; which one (or ones) you choose will depend on your unique configuration needs. The Ring Stick Up Cam is a fairly versatile option, letting you monitor both indoor or outdoor areas in 1080p HD video. It can also rest on a flat surface or be mounted to a wall or ceiling. Like the Ring Doorbell, this camera allows two-way talk, so you can see and speak to whoever’s on the other end of the lens using your phone or connected device.
While having a couple of power/connection options already provides flexibility, there is even more flexibility thanks to accessories (sold separately). The first accessory is a Secure Mount that locks your device into place. Replacing the magnetic base, it helps prevent device theft. The second is the Stake Mount: Stick the mount into the ground or a potted plant to give Flex a hidden camera effect. Third is the Twist Mount, which can bend and wrap around an object so that you can hang it virtually anywhere. Canary suggests using it to place Flex on fixtures, railings, or even branches.
Arlo Pro can be used outdoors only if running on battery or solar power. (While they once sold an outdoor power adapter, it is no longer available due to quality issues.) If you’re using battery power, you will have to charge your camera indoors as the included power adapter is not rated for outdoor use. Furthermore, if your battery is too cold from being outside, you might have to wait for it to warm up before you can begin to charge it. If you don’t like the sound of that, you can invest in the $59.99 Pro Charging Station and an additional rechargeable battery ($49.99). You can use the charging station to charge two batteries simultaneously so that you always have one ready to go when needed. You can also purchase the Arlo Pro UV-resistant silicone skins, which provide added protection against condensation and sun glare.
Other “Family” Devices Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon) Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro, Arlo Security Light, Arlo Audio Doorbell (coming soon) Stick Up Cam, Solar Panel, Ring Chime, Floodlight, Ring Doorbell, Ring Protect, Ring Beam Solar Panel, Ring Chime, Ring Doorbell, Floodlight, Spotlight, Ring Protect, Ring Beam Nest Cam, Nest Cam IQ, Nest Secure, Hello, Dropcam, Nest Thermostat, Nest Protect Canary, Canary View
Finally, I wouldn’t put too much weight into the Amazon review from 2015. Things have really changed since then, including the Nest app. The Nest app was a little slow going when first launched, but they’ve really improved it and added back features that were initially missing, though found within the Dropcam app, plus added new features like person detection.
While other smart security systems let you arm the alarm through key fobs, unfortunately, the Ring Alarm system does not have this capability at this time. Using a fob makes things quicker and easier than opening an app or punching in a code; however, Ring does have plans to make its system compatible with Alexa in the future, so that will make things a little easier.
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
Ring suggests that the motion detector should be placed in a location with a good view of a high-traffic area likely to be passed by any intruders, with the detector placed about seven feet off the floor. Motion detection sensitivity can be adjusted in the app if you find you're getting too many false alerts such as from a pet. The detector can be mounted using either adhesive or included screws that attach a bracket to the wall for easy removal of the detector itself.
Hi Rose, I’m intrigued that you have a traditional alarm system but also one of these new wireless versions. Are they integrated? Can they be? I haven’t looked at the Ring, abode, and Nest systems because I have am old-fashioned standard system that came wired into my home. I’d love to integrate it with my Ring cameras and doorbell cam, or even get one of the new wireless voice-activated bases or keypads. Can that be done with any system today?
Since the Security Kit only comes with one detector and one sensor, you’ll likely need to invest in more sensors if you’re looking to cover any space with multiple access points. The advantage of the Ring contact sensors is that they work on both doors and windows, meaning you can easily swap them from one location to another as you configure your set-up. When triggered, the sensors will send instant alerts to your phone, letting you react in real time. While a little bigger than traditional sensors, these come in a bright white color, blending in with most door and window frames.
The Spotlight Cam employs the common method of using bounding boxes over the camera image to define detection zones, but you can use the box handles to twist it into any kind of geometric shape, not just squares. That allows you to work around outdoor areas where you don’t have as much control over the environment as you do inside your home. There’s also a scheduling option to disable motion alerts during certain times of day.
I own and use 4 Ring devices at my primary and secondary home. Until last night, I have been very pleased with the product. Last night, we had a heavy storm at our second home and the electricity was off for a period of time. My Nest devices automatically reconnected to my wifi as soon as the power was reestablished; not so with the Ring devices. Ring required my to physically be close to the devices with my iPhone in hand to reestablish the connection. This is a serious flaw for users like myself and one that Ring needs to correct if I am going to continue using their product. The electricity, and thus the wifi, at our mountain home loses power several times a year. I don't want to travel 700 miles just to reconnect a Ring device or two.