Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
You can add additional Ring door/window sensors and motion sensors to scale up the system as needed; the kit also works with a FirstAlert smoke and carbon monoxide detector. But that's about it, for now. Ring plans to add additional sensors at a later date and has hinted at upcoming partnerships with major third-party platforms like Alexa and Google Assistant. But considering Amazon bought Ring back in February, this system should really already work with Alexa and the Amazon Cloud Cam (it doesn't).
P.S. My house was broken once when we was abroad, without breaking a door or a window. In fact, the thieves entered thru the front door without breaking anything – the lock was just magically opened. Because we know we didn’t lose any key, the assumption is that they used lock picking technique or a lock picking gun (https://en.wikipedia.org/wiki/Snap_gun) – So I don’t think it’s good to assume thieves are dumb (But i’m not in the USA so maybe you have different kind of thieves ;-] )..

A couple of important things to note during setup. First, for the contact sensor, be sure to have the magnets aligned, otherwise it won’t work. We learned this the hard way after spending an hour troubleshooting. Second — and this is really important – depending on where you live, you may need to get a permit for the system from a local government agency. Ring helps you navigate through this process by looking up your address and telling you whether a permit is required.
If you already have a Ring doorbell or security camera, the integration is quite seamless, and the value becomes even better on the annual costs. Ring charges $30 a year per camera on the regular subscription, so if you've been holding out on adding to your system, this may push you over the edge. The company has plans to offer additional sensors in the future, like smoke and CO sensors, water sensors, and more, which will only help make it even more robust.
abode also sells their own line of cameras. They sell an image sensor, which will take three snapshots if it detects motion, and two streaming cameras. I’ve tested two of the three. The two cameras I tested were unfortunately unimpressive, and I found Nest cameras to be vastly superior. abode’s newest camera, not tested, offers two major benefits: FHD 1080P resolution and two-way audio. Of course, there’s also abode iota which offers the same camera specs as the newest abode streaming camera. The benefit of using abode cameras over Nest cameras is free cloud and local storage. abode’s streaming cameras support a microSD card and include three days of free cloud storage. Nest supplies just 3 hours of snapshot storage for free. As described above, if you want more Nest storage, you will need to pay for Nest Aware.
The Nest Guard motion sensor can detect motion within a 90° field of view up to 10 feet away. It also includes tamper detection as well as a proximity sensor (wakes on approach) and will let you know if it’s moved or if someone tries to jam your signal. However, in testing, I found that none of the promised tamper sensors worked. I did not test jamming detection.
Pricing for add-on components is pretty much in line with what you'll pay if you have a SimpliSafe or Abode system. Extra contact sensors are $20 each, another motion sensor will cost you $30, and a range extender goes for $25. Additional devices including a Smoke/CO detector ($40), a Flood/Freeze detector ($35), and a Dome Siren ($30) are not yet available.
Contact sensors come in two pieces, a large sensor part and a smaller magnet part, and both pieces must be aligned within 1/4 inch of each other when the door or window is closed. One piece goes on the door or window while the second part goes on the frame, but it doesn't matter which part goes on which side. When the door or window is opened, the two parts are separated, and the sensor triggers.
Pricing for add-on components is pretty much in line with what you'll pay if you have a SimpliSafe or Abode system. Extra contact sensors are $20 each, another motion sensor will cost you $30, and a range extender goes for $25. Additional devices including a Smoke/CO detector ($40), a Flood/Freeze detector ($35), and a Dome Siren ($30) are not yet available.
Expand Security With Other Devices Nest Cam, Nest Protect, Nest Thermostat, Nest Secure, Nest Hello, Nest Cam IQ Ring Stick Up, Solar Panel, Chime, Chime Pro, Ring Floodlight Cam, Ring Spotlight Cam, Ring Protect, Video Doorbell, Ring Beams Canary, Canary View Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon)
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
When we tested out the accuracy of the motion and contact sensors, we were impressed with how quickly our app registered movement. Opening the door meant that our app automatically showed the “faulted” icon indicating movement – in fact, it was almost instantaneous. Same for the motion detection sensor – the notification on both the hub and the app appeared almost immediately. This was the case whether we were in the house or not. With some devices we’ve tested, particularly with security cameras, there’s often a lapse with notifications. It doesn’t appear to be the case here.
2) many users have not come up to speed on the functionality fo this system. thats not their fault.its really easy to set up quickly and with basic functioning, But the more you fool around/experimenter/learn about the system the more functionality it has. Ring really needs to come out with a comprehensive instruction manual and/or video-once you understand take keypad you will grasp it actually has more functionality and is easier to use than most legacy hard wired systems people are replacing.
Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
I haven’t had any issues with Arlo Pro, but I called their support team to get a feel for support quality. As Netgear owns Arlo, phone tech support is managed by Netgear, and they offer offshore support. It was the stereotypical experience you think of when you think of tech support. I called into a phone queue, waited a little bit (not long), got transferred to someone who struggled to understand my question, she put me on hold, she came back to clarify my question, she put me on hold, and then she came back with an answer. While it wasn’t a bad experience, it was sub-par compared to the tech support experiences provided by Nest, Canary, and Ring.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
Equipment sensor: I have an expensive four-wheeler and zero-turn mower in my backyard, and would like to see some kind of sensor (other than motion, too many plants and wind won’t make it practical) to protect these expensive items as well. This would be a great selling point; maybe like a magnetic plug stuck to a metal part of the bike’s body, that if it’s removed from that metal body it alerts the brain.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.

After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
I want good coverage of two exterior doors and below a deck, but after seeing that Y1 cameras (not mentioned here) sell their data to third parties and can even share clips of customer video, and with the security concerns that go along with baby monitors being viewed on the web from weak passwords, I’ve realized that my main priority is preventing anyone other than my family from being able to view my footage. It looks like my only option is the Argus since it does not include cloud storage, but I’m wondering if use of the Argus mobile app also means that the company’s employees can view our footage. We’re not doing anything illegal, heh, but I really value privacy. Do you know of any cameras that can only be viewed by the customer?
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.

The kit comes with a base station, keypad, contact sensor, motion detector, and range extender. Since Ring is pre-packaging all of this, all of the pieces are designed to automatically talk to each other, which makes setting them up easier, but could lead to some confusion when things go wrong. You won't be able to take any of these parts and integrate them with another Ring Alarm system, just the one they come with.


 We installed two new Floodlight Cams, one over the garage, and one in the backyard. Easy installation into existing Floodlight box. After installation, we had a problem connecting. We just call up support and they walk us through it within minutes. Great compliment to our Ring Video Doorbell Pro. We love it so much, our daughter got one, and we monitor their house too.
×