Wow, thanks for putting such a great article together. I knew about Ring – for some reason their marketing got to me, and started to consider, which lead me to this article. But, after reading this I might have to revisit purchasing it. Looks like some people are thinking Nest after reading it, but it’s leaning me toward Adobe. Thanks again for all the details!
I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
Since I’m assuming you will want to live stream often to check on your kids, I would recommend a wired security camera. The original Canary is a good option as is Arlo Q. Both will allow you to live stream from anywhere. Original Canary does not offer two-way audio for free, Arlo Q does, something to consider if you want to be able to talk to your childcare provider or children using the camera. Both cameras include free cloud storage.
Ring is owned by Amazon, so we fully expected to be able to have our security system chatting it up with our Amazon Alexa and other smart home devices. But that’s not the case, at least not yet. We spoke to Mike Harris, Ring’s President of Ring Solutions, and he said that Ring wanted to focus on security first and foremost, as well as getting people comfortable with the system, before introducing integration with other products. But users can expect integration that already exists to be activated soon.
I installed the Spotlight Cam Wired at the front of my home, where there’s an outdoor outlet within the power cord’s 20-foot range. I put the Spotlight Cam Solar in the backyard, where there’s more unobstructed sunlight. Each camera comes with its own mounting tools, including a screwdriver, drill bit, mounting bracket and screw set with wall anchors.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
Although SimpliSafe's basic monitoring service goes for $14.99 per month for 24/7 monitoring, you have to pay an additional $10 more a month to control the system from your phone and to receive email and push notifications. Tack on another $4.99 per camera per month to record, download, and share video, and you're up to around $30 per month, which is three times what you'll pay for a Ring Protect Plus plan.
While fairly similar to the Ring Stick Up Cam, the Spotlight Cam is built for the outdoors. That means it comes with a few added security features, such as a siren that you can activate remotely to scare away anyone who triggers its motion detector. The camera is also built with infrared night vision, meaning you’ll be able to check in on your home and your surroundings when you need to the most.
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
2. If you want monitoring of video, check out SimpliSafe. They won’t monitor your motion events, but rather your sensors. If your sensors show an alarm event, they can log into your camera to gather video evidence. They offer what’s called ‘video verification.’ The downside to SimpliSafe, when compared to the options presented in this article, is that it lacks home automation. The system does support Nest Thermostats, Alexa, Google Assistant, and the August Smart Lock Pro, but it doesn’t offer an automation engine. Also, integrations are not free, which is in contrast to what abode, Ring, and Nest offer. Finally, SimpliSafe does not have an outdoor camera though they did recently release a video doorbell and have plans to launch an outdoor camera. abode, Nest, and Ring all lack professional monitoring of video and the cameras are not tied to the alarm as motion sensors. Camera motion activated events are self-monitored.
The camera is powered by the same quick release battery pack used on the Ring Video Doorbell 2. It contains a mini USB charging port and is rated to last for six to twelve months between charges depending on camera and spotlight activity. The camera can hold two battery packs and will automatically switch over to the secondary battery when one runs out of juice. Additional battery packs are available for $29 each. If you prefer a wired solution, Ring sells a Spotlight Cam Wired model for $199.
Nest Indoor or Nest Outdoor? There are pros and cons to both. The Nest Cam Outdoor might be slightly more accurate, but that’s probably more to do with positioning – it has a better vantage point. The fact that it is more accurate, has sound, and night vision made me want to switch, but I could not deal with the way it looked once installed. In the end, Nest Hello provides CVR with the clean aesthetic that’s important to me.
As of this writing, there are only a handful of add-on devices available that will work with the system, and for now, it doesn't support integrations with other Ring devices or third-party Z-Wave and Zigbee devices. That said, integration with Ring doorbells and cameras is on the way, and interoperability with third-party devices is also in the works.
The Home mode monitors only sensors installed at entry points into the home but will ignore any motion or movement that occurs within the house itself. The home mode works great for a night setting, especially if people in your family are prone to moving throughout your home at night. Typically this movement would trip the sensors, but not in Home mode.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Ring lacks third-party integrations. The Base Station communicates with Z-Wave and Zigbee, and I’ve confirmed those protocols were added for a reason, but they haven’t taken advantage of them. The system supports the First Alert Z-Wave Smoke/CO detector which is also compatible with the Ring Response service. Soon, it will also work with the Dome Siren. But that’s it. Ring currently lacks an IFTTT channel and even an Alexa integration, which is odd as Ring is owned by Amazon.
Equipment sensor: I have an expensive four-wheeler and zero-turn mower in my backyard, and would like to see some kind of sensor (other than motion, too many plants and wind won’t make it practical) to protect these expensive items as well. This would be a great selling point; maybe like a magnetic plug stuck to a metal part of the bike’s body, that if it’s removed from that metal body it alerts the brain.
Some jurisdictions require permits for monitored alarm systems, and Ring will guide you based on the address where you're using Ring Alarm. In some areas, Ring can obtain the permit on your behalf once you pay required fees, but in other jurisdictions you'll need to handle it on your own. Either way, once you have your permit, you can enter the permit number and expiration date in the Ring app to make all parties aware that your system is properly registered. My town does not require permits, so I did not need to go through this step.
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.
As for the base station, you can hardwire it to your router or connect to it via Wi-Fi. I opted to hardwire it, in hopes that it would provide a more stable connection, considering the importance of it. There is an AT&T SIM card inside of it as well, which is what the system uses as a backup for when your internet connection goes down. The cost of this SIM card and its service is covered in the monitoring plan. Once the base station is powered on and hooked up to your router, you can add it your account.
Enjoy superior image quality courtesy of the 4MP Enjoy superior image quality courtesy of the 4MP sensor delivering twice the resolution of 1080p for stunning clarity. Wide Dynamic Range enriches your image quality with deep blacks contrasted whites and vivid colors so images appear true to life. Infrared LED's give you up to 100 ft. of night vision ... More + Product Details Close