When you say, “a service like Ring,” do you mean the ecosystem itself? As in, you’re looking for a doorbell and outdoor camera that work under one app? Or do you mean something different? Short answer is no, I can’t think of anything off the top of my head. Long answer: Ring Elite, as you said offers PoE as does DoorBird Video Doorbell, but I do not recommend DoorBird. Regarding security cameras, Arlo Q Plus (no doorbell, but it does work with IFTTT). EZVIZ Husky offers PoE (no doorbell camera, poor quality IMO, works with IFTTT). OCO Pro Bullet offers PoE as does their Pro Indoor camera (no doorbell, but it does work with IFTTT). In order, I like Arlo Q the best (it’s got a strong lead in this three-way race), followed by Oco, and EZVIZ. I have tested cameras from all three companies.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
Wow! I’m impressed that you read the whole thing. A mobile hotspot, right? I think they would all tell you that it’s possible, but not something they recommend. The signal isn’t going to be as reliable as connecting to a WiFi network. Arlo sells a 4G camera called Arlo Go, but it’s more expensive upfront and the monthly fee is higher as you’re paying for cellular connectivity.
After receiving Arlo Pro 2, I completed a second battery test in a lower traffic environment. With the same settings, I ran Arlo Pro and Pro 2 side-by-side to see if Pro 2, with its higher resolution, drained the battery faster. It did not. In fact, it held a slightly better charge than Arlo Pro. Of course, I’m assuming this has more to do with the fact that the camera’s battery is newer and less to do with the fact that it’s a different camera. During the second test, both cameras lasted 5 months on a single charge, and it took 2 hours and 30 minutes to recharge the batteries.
The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
I got my new Ring security system yesterday and installed the panel, door sensor, and motion sensor yesterday. I have had a security system with a major national monitoring company for nearly six years. I am not new to this. I got the new Ring system to replace the current system I have due to the price of the monitoring. I like the idea of having $10 a month for all of my cameras and security system combined. By switching, I am able to save $55 a month by cancelling my previous monitoring from the companies that did so for my security system and cameras.
Ring Alarm supports a sensor bypass mode, which allows you to arm the system even if one of the sensors is currently tripped. For example, if you want to arm the alarm but leave a monitored window open, the system will notify you upon arming that one of the sensors is currently faulted. You can choose to close the window to clear the sensor or bypass it, which will arm the system but not monitor that sensor until the next disarm/arm cycle.
Ring finally unveiled its brand new security system in July and while their doorbell is tried and tested, the same can’t be said about their security system. Everything has to start somewhere, but it might not be worth risking your home security on a system that is bound to have some bugs and kinks to be worked out. When it comes to the safety of your family and home, you don’t want to take any chances. One great thing about this system is that they do offer monitored security, which is extremely important. It’s nice to be able to check up on things yourself, but it’s not your full time job to monitor your home. Leave it to pros who can monitor your home full time and who can immediately contact the authorities in the event of an emergency. Any home security system without this feature is honestly pretty worthless. Protect America also offers 24/7 professional monitoring.
This has to be some of the worst customer service I have ever experienced. The web site is very slick, and the pre-sales information is very well prepared. The product does not work, and my Wi-Fi extender (that I bought just for this purpose) didn’t even get a usable signal from 15 feet away with no obstructions. So, after long chats (and waiting a LONG time to get someone on chat in the first place), I convinced them after several conversations to give me a refund… which never came. Three weeks after they received the product back, there was no refund. I went on chat to find out why, and TWO HOURS of chatting later (after their chat system kicked me out for inactivity while THEY looked up my information), they say a refund was issued, but refused to provide any email documentation stating such. This is absolutely unacceptable. I wish I had come to this site to look at these reviews before I wasted time and money on a product that doesn’t work, and which is supported by an incompetent support staff. RUN AWAY from this company! They pretty much stole $500 from me!
With the Spotlight Cam Battery ($199), Ring continues to grow to its already impressive stable of home security devices. This battery-powered outdoor security camera is completely wireless and offers motion detection with triggered recording and compatibility with IFTTT and other smart home devices. As with other Ring products such as the Video Doorbell Pro and Floodlight Cam, you have to subscribe to one of the company's cloud plans to view recorded video, and it doesn't offer pre-buffered recording. But it's very easy to install and offers sharp 1080p video, making it a strong option for outdoor security cameras.
3. Both Arlo and Nest have a lag from time to time. There are moments when I pull out my phone to stream Nest and it just spins and spins. I have to hard close it and then reopen the app. When it’s working, I can usually access footage in about 4 seconds. Arlo takes about 8 seconds to wake. There is also a 4 second difference between what you see on your phone and what’s happening in real life. WiFi will really depend on the speed and quality of your internet connection at home. I would suggest performing a quick test to see your current upload/download speeds.
The Ring mobile app recently got a facelift that gives it a more polished Dashboard featuring live preview windows. The Alarm controls are at the top of the Dashboard screen and include Disarmed, Home, and Away buttons. Below the buttons is the status of all installed sensors (cleared, open), and below that are tabs for viewing Neighbors posts and Event History.
The Nest Aware 5 day is $50 per year. If you add a second camera, it would be $75 per year for both so the difference isn’t as vast since you get 50% off subsequent subscriptions. My suggestion is that you dig in deeper as there are pros and cons to both so pick the one which has features that best align with your goals. A couple of bonus tips, which you may already know…1. I’ve owned both combos (Ring + a Nest Thermostat) and (Nest Hello + Nest Thermostat). To me, the only advantage is one app, and using two apps wasn’t a big deal IMO. If you use Nest’s Home Away/Assist, you might feel differently, but I don’t take advantage of that feature. 2. I’ve also tried Ring Spotlight and Ring Doorbell together. Again, the only advantage is that you will have one app. You can’t use them to trigger each other. For example, you can’t say, “When someone rings my doorbell, tell Spotlight to record.” I thought that was kind of interesting…
The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
I tested the Spotlight Cam Wired and the Spotlight Cam Solar separately. The Wired is a great option if you have easily accessible outdoor power outlets. The 4.96-inch-by-2.72-inch-by-2.99-inch camera has a 20-foot power cable attached at the back as well as a built-in wall mount, and unlike with the battery powered models, you won’t have to worry about dead batteries or too many overcast days interrupting your surveillance. I’m guessing, however, most folks will need one of the battery-powered cameras.
After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.
I’ve stayed away from all Ring products as their API is only accessible by large entities they approve of. You are also forced to use the cloud. If they have an outage, it impacts you. In my smart home setup, I’m not reliant on the cloud for many aspects. There are some exceptions, like Nest thermostats and Protects. Alarm system is locally controlled, Z-wave devices are locally controlled as well. If my Internet is down, then remote access and the Nest products is not possible. The rest of the devices continue to work. My video doorbells are locally controlled; no need for the cloud nor their monthly/annual fees. I want to capture images, I can do it locally but also review it remotely.
Arlo Go is yet another Arlo camera. It’s an Arlo Pro plus 4G. The big catch is that a cellular plan via Verizon is needed as it doesn’t work with WiFi. It does come with 15 data minutes to send 15 minutes worth of video to the cloud for free. Once you’ve used those minutes, you’ll need to buy more time. Data plans start at $4.99/month for 15 data minutes and go up to $32.99/month for 225 data minutes. Arlo Go sells for $429.99 on Amazon or 399.99 from Verizon ($349.99 if you sign a 2-year contract).
Standalone accessories can be added to your setup in a similar manner to those included in the base kit, although you'll have to scan a QR code on the back of them using the Ring app in order to get them to appear. From there, it's the same process of choosing the sensor type, naming it, assigning it to a room, and testing to make sure it's registering properly.
Hey- just happen to be reading this, and full disclosure I’m one of the canary founders. Our battery is designed to sub – temperatures and i had mine sitting under snow and it still worked (though video was white as it was… well… under the snow). We say it goes to -4 degrees F (-20C). But yea, the battery won’t last as long in that cold, but you can keep it plugged in, or just charge it overnight to get it back up and running. Cheers, Adam