In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.

Ideally suited for the darker nooks on your property that are susceptible to breach after sundown, it comes in four models: Spotlight Cam Wired ($199), Spotlight Cam Battery ($199 at Amazon), Spotlight Cam Solar ($229), and Spotlight Cam Mount ($249 at Amazon). The cameras in all four models are the same. The Battery and Solar use the same battery; the latter just comes with an included solar panel that can also be purchased independently ($49 at Amazon). 
Tap the three-bar icon in the upper left corner of the Dashboard to access the Alarm settings where you can enable/disable email and push notifications, change your location, enable/disable specific sensors while in Home and Away mode, change the Entry and Exit delay timers (30 to 180 seconds), and allow additional users to control the Alarm and other Ring devices.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
In addition to sharing camera access, having multiple users will make geofencing even more intelligent. The cameras will arm when everyone is away and disarm when at least one person is home. You can also see who is home and who is away using the mobile app and set up Presence notifications to alert you of the same. Finally, it brings everyone in on the action. If an event is detected, an alert will be sent to all users. If one user responds to the alert, other users will be able to see how that person responded. You can also leave a comment on the event and chat with other users directly within the app.
You can set your system to “Away,” which means that all the sensors connected to the system are monitored for activity. “Home” mode means that all exterior and perimeter sensors are monitored, but not inside your home. “Disarmed” mode means that all monitoring is off, and is useful if you’re having a barbecue and people are coming in and out of the house frequently. You can change modes by hitting the corresponding button on the keypad and the access code you’ve created for the system.
SANTA MONICA, Calif. & SEATTLE--(BUSINESS WIRE)--Ring, a company on a mission to reduce crime in neighborhoods, today announced the upcoming availability of Ring Stick Up Cam Wired and Ring Stick Up Cam Battery. The new Stick Up Cams are Ring’s first cameras meant for both indoor and outdoor use, and further bolster the Ring of Security around homes and neighborhoods. Ring’s ever-expanding line of home security devices, along with the Ring Neighbors app, enable the company to further its mission of reducing crime in neighborhoods across the globe. Ring Stick Up Cam Wired is now available for presale at Ring.com and will begin shipping on October 18. Ring Stick Up Cam Battery will be available in December.
With the base station up and running, I was able to verify the address associated with my Ring account, enter my closest cross street to assist emergency responders, and add emergency contacts to be notified if the alarm trips. Adding a verbal password to authenticate my account when Ring calls due to an alarm event was the last step, and I was good to go with the 30-day free trial of professional monitoring. After the free trial, professional monitoring costs $10 per month or $100 per year, and it also includes cloud video storage for any other Ring camera and doorbell products you have in your home. 

Works with Alexa Devices With a Screen, Google Assistant, IFTTT, SmartThings, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, SmartThings, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, Stringify Alexa Devices With a Screen, Google Assistant, IFTTT, Stringify, Wink Alexa Devices With a Screen, Google Home, IFTTT, Works with Nest, Stringify Alexa Devices With a Screen, Wink, Google Home
The picture isn’t quite as rosy if you’re also looking for a full-fledged smart home system. Ring Alarm is positively capable of being a great smart home controller. But it’s not that today. And to be fair, Ring isn’t promising that it ever will be—at least not officially. But they wouldn’t have built in Z-Wave, ZigBee, and whatever that third mystery radio is if they didn’t intend to go down that path.
As you set up each piece, you're able to give it a name (like Front Door, Office Window, Main Hallway, etc), and then a location of where it is in your home, as well. Within the app, the devices are grouped by type, and the names that you give each piece is displayed to help you know what is what. While setting up the keypad you'll be asked to create a PIN number that you'll use to engage and disengage. If you have additional family members, once you share the new equipment with them in the app, you can set PIN numbers for them as well.
You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.
When it comes to integrating your home alarms with the rest of your smart home, both Nest and Ring offer the option to purchase extenders. It may take a bit of time to figure out if you need one, since the size, layout, and materials in your home can all make a difference in creating dead zones on your property. Nest’s extender will set you back $70, while Ring’s is just $25.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
I’m not certain about Nest, but I asked abode about this before. They said, “We have what is called abode Signal Guard. Unlike other smash and grab solutions, the Signal Guard works whether your system is self-monitored or professionally monitored. The abode Signal Guard alarm acts just like a normal alarm where notifications are sent and the siren(s) go off until the alarm is disabled. If you are a professionally monitored customer, the monitoring center is notified of the abode Signal Guard event.”

Both systems offer exceptional protection and support, so the choice really comes down to your unique needs. For someone who wants their home to be fully automated and for their devices to talk to one another, Nest is the easy choice. While more expensive, the system offers excellent connectivity and added products like the Nest Tags and connected lock.

The Ring Alarm system comes in an attractively packaged box that includes a square base station, a keypad, contact sensor, motion detector, and range extender. Unlike the Nest Secure home monitoring system, Ring created the hub and keypad as separate devices to give homeowners more control over where to place them. The products are both lightweight and durable, although the keypad digits do feel a bit antiquated when you press them.
Biggest problem though is the ‘wake up’ time. You reported on it, but I didn’t really take the time to really consider, “Hey, if I want to catch the kids driving by banging mailboxes, by the time they drive by and the camera wakes up, they’re gone!’ Well, that’s just what I learned as I set everything up, had the ap working and started getting notifications when people drove by. I thought AWESOME! it works! Well, not so much. Unfortunately, the car is never seen on the video, so the purpose is pretty much defeated.
The camera uses the same Android and iOS mobile app as the Ring Floodlight Cam and all of the Ring doorbells, and you can access it from a PC using the web console. The Spotlight Cam appears in the list of installed Ring devices in the app: tap it to access its dashboard screen where you can turn motion alerts on and off and check the battery level. Tapping the Live View button launches a live video stream in landscape mode with buttons for turning the spotlight on and off, sounding the siren, recording and sharing a clip with neighbors, push-to-talk (two-way audio), muting the sound, and ending the stream.
If you’ve been following along, you know that when I face wire management issues or I have to use a power drill, I call my dad. Drilling into brick isn’t easy. Even for dads, apparently. In the end, I wasn’t sure I wanted to keep the camera anyway. What if I don’t like the camera? Do I want holes in my brick? With that in mind, we decided to use a piece of industrial strength 3M adhesive on the power adapter (the power adapter weighs about 4.5 oz) and a regular 3M strip on the camera wall plate. Everything seemed fine at first. At about 10 o’clock that night, I heard a loud crash. Thankfully, the camera was fine, but the power adapter proved to be too heavy for the adhesive.

Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.

×