This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.
A Ring home security system can get pricey, as you need to pay upfront for the devices. The plans are straightforward, so you won’t run into any confusion there. The low monthly cost of the plans makes the premium features accessible for any budget, especially if you only have one or two Ring devices. The real question is whether Ring offers enough value compared to the other systems on the market. If you’re willing to take a more DIY approach with installation and you don’t mind a lack of home automation features, then the Ring is a contender.
You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.
Thank you so much for your great review! It’s so thorough and really helps with decision-making. My question is, what would you pick between the Ring Cam Battery and the Arlo Pro (not the 2)? I purchased the Ring Spotlight Cam Battery because I liked the idea of the light and the battery power, but as i read my reviews, I see that the video can lag, and it’s quality is highly tied to the WiFi signal. I also bought the Arlo Pro because it was on sale and it seemed to get really top reviews even though it’s only 720p compared to the Ring Cam Battery. I will be mounting these outside. I noticed that the Arlo Pro 2 way talk is really hard to hear compared to the Ring Cam Battery. Thank you again for all your information!
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
Along the bottom of the screen are buttons for Event History, Device Health, Linked Chimes, Motion Settings, Motion Snooze, App Alert Tones, and Shared Users. The Event History screen offers a list of recorded activity. Tap any event to play a clip and share it with friends and family or with your neighbors by pressing the Ring Neighborhoods button. Ring Neighborhoods is a feature that lets you share recorded events with neighbors who have downloaded the app and signed up to participate. It is based on the location data entered during setup and allows you to add a comment along with your clip.
Thinking of battery-powered original Ring, I don’t think opening up the mount and recharging a battery every 3-6 months would faze me. Having two doorbells (the “real” one on the side and the Ring on the door frame) probably would bug me more than a little. It did not occur to me to move the existing doorbell, just to install the Ring in the new location on or near the door.
The Ring app will automatically detect the rest of the items that came pre-packaged with the base station once its initial set up is complete. You'll need to pull plastic tabs on each piece so that they can power up, and you'll want to do this one at a time. If you pull all the tabs at the same time, the system tries to connect to multiple devices at once and slows down the setup process.
Although this looks intriguing, my experience with Ring products is that they work about 75% of the time on our two cameras. And the problems are definitely with Ring, not our network - as sometimes our iPhone / iPad won't connect, but an Android device right next to it on the same network will connect just fine to the video. Occasionally it is the other way around, but sometimes nothing will connect to the Ring camera even though my home network is up and working fine. That's annoying for video alerts... but for a home alarm, I don't think I would trust them based on my experience with our Ring cameras.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
Use the Device Health button to view signal strength, firmware version, and the current Wi-Fi network you are connected to, and the Linked Chimes button lets you enable motion settings for any Ring Chime devices you may have installed. Motion Settings lets you adjust sensitivity using the slider, create detection zones, and set up schedules for enabling/disabling motion alerts, and Motion Snooze lets you temporarily turn off alerts. Tap the Shared Users button to invite friends and family to view video clips, and the App Alerts Tones button to assign one of a dozen sounds to play when motion is detected.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
WINNER Nest. While Nest Aware is a more expensive service, advanced features like person detection combined with the ability for the camera to record 24/7 make it a better overall home security camera. However, Arlo with Arlo Smart is also a contender as the service is less expensive and the camera includes free storage. You can also add continuous video recording to Arlo Pro 2, but only if using the camera plugged-in indoors. You can compare Arlo and Nest’s CVR plans here. Ring will also soon add continuous recording, but only if you have a wired Ring camera.
** Information used for home security alarm system comparisons was obtained November 2016 through telephone and online research. ADT prices: based on total out-of-pocket expense to obtain services; installation based on fees for similar home security equipment packages; "Monitoring" price listed includes the additional "warranty" or "extended service plan".
This is the Spotlight Cam’s bigger, badder older brother. Equipped with two ultra-bright floodlights and a siren, the Floodlight Cam is impressive enough to scare away any potential intruders who approach your home. However, its extra power means it must be hardwired to weatherproof electrical boxes, an installation process that may limit where you’re able to set it up. However, if you want to feel secure and safe at all hours of the day, it might be worth the extra effort.
In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
Person Detection was the first feature launched under the Canary Vision project, a project that aims to add AI-powered intelligence to Canary devices. The second Canary Vision feature is Package Detection, which lets users set up notifications for when packages are delivered to their homes. This feature is exclusive to Canary Flex, and it can only be accessed if you have a Canary Membership.
The Spotlight Cam captures video at 1080p and has a 140-degree field of view, but lacks the pre-buffered recording capabilities that you get with Netgear's Arlo Pro 2 camera and the Ring Video Doorbell Pro. It uses four infrared LEDS to provide up to 30 feet of night vision and has a built-in 110dB siren, an 802.11n Wi-Fi radio, and a speaker and microphone for two-way audio. The spotlight itself consists of two strips on either side of the camera, each with four LEDs that provide an overall brightness of 700 lumens with a 4,000K color temperature. The camera comes with one battery pack, a mounting bracket, wall screws and anchors, a screwdriver and drill bit, and a setup guide.
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.
After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
The one thing Apple fans might miss is HomeKit support, which isn't included in Ring Alarm and still has yet to come several other Ring products for which HomeKit support was promised long ago. Ring declined to offer any new details on its HomeKit plans, but acknowledged that customers continue to request it and promised the company is still working on it.
I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($250 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet.