For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.

Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.


You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.

A Canary Membership provides 30 days of video history, full-length video clips, social sharing, custom Home mode, two-way audio, desktop streaming, and unlimited downloads for $9.99/month for up to five cameras. It also provides access to a Safety Buton feature backed by Noonlight, formally SafeTrek. If you have more than five cameras, Canary charges an additional $4.99 per camera per month. You can use an unlimited number of cameras in a single location with a Canary Membership.
We put these products side by side to give you a comparison of what each one offers, along with a rundown of their similarities and differences. Read on for Ring Alarm vs. Nest Secure: an in-depth look at two of the best home alarm systems on the market. And for a close look at each system one by one, be sure to check out our full review of the Ring Alarm, as well as our full review of the Nest Secure.
Wow, thanks for putting such a great article together. I knew about Ring – for some reason their marketing got to me, and started to consider, which lead me to this article. But, after reading this I might have to revisit purchasing it. Looks like some people are thinking Nest after reading it, but it’s leaning me toward Adobe. Thanks again for all the details!
I would go beyond resolution and consider what you want the camera to do. My favorite outdoor camera is Arlo Pro, but a battery-powered outdoor camera will come with its own challenges. In my front yard, I need 24/7 continuous recording which is Nest, but I can’t deal with the way the giant wire looks on Nest Outdoor so I used Nest Cam Indoor filming through a window for a couple of years, which also has its own challenges, until I swapped out my Ring Doorbell for Nest Hello. Nest Hello is Nest’s video doorbell and it can record continuously.
The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.
Thinking of battery-powered original Ring, I don’t think opening up the mount and recharging a battery every 3-6 months would faze me. Having two doorbells (the “real” one on the side and the Ring on the door frame) probably would bug me more than a little. It did not occur to me to move the existing doorbell, just to install the Ring in the new location on or near the door.
What happens if your home Wi-Fi goes out? Luckily, both the Ring and Nest systems offer cellular connectivity, so your alarm will stay online even if there’s a power outage or your Wi-Fi disconnects. Nest charges an additional $5 per month or $50 per year for cellular connectivity, while Ring offers the feature when you purchase the Protect Plus plan. Both systems also incorporate battery backup. While the Nest device will continue running for 12 hours without an external power source, the Ring will last for 24 hours.

Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
The camera uses the same Android and iOS mobile app as the Ring Floodlight Cam and all of the Ring doorbells, and you can access it from a PC using the web console. The Spotlight Cam appears in the list of installed Ring devices in the app: tap it to access its dashboard screen where you can turn motion alerts on and off and check the battery level. Tapping the Live View button launches a live video stream in landscape mode with buttons for turning the spotlight on and off, sounding the siren, recording and sharing a clip with neighbors, push-to-talk (two-way audio), muting the sound, and ending the stream.
The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
Thank you so much for your great review! It’s so thorough and really helps with decision-making. My question is, what would you pick between the Ring Cam Battery and the Arlo Pro (not the 2)? I purchased the Ring Spotlight Cam Battery because I liked the idea of the light and the battery power, but as i read my reviews, I see that the video can lag, and it’s quality is highly tied to the WiFi signal. I also bought the Arlo Pro because it was on sale and it seemed to get really top reviews even though it’s only 720p compared to the Ring Cam Battery. I will be mounting these outside. I noticed that the Arlo Pro 2 way talk is really hard to hear compared to the Ring Cam Battery. Thank you again for all your information!
To test all the professionally monitored security systems out there would too expensive due to the high monthly fees so I usually keep up with them at CES when I can, and Vivint attends CES. I’ve seen all of their cameras including the doorbell in Vegas, but it’s not the same as living with something for months and experiencing the quirks that often come along with longterm ownership. You can read my Vivint review here, but I doubt it’s going to help with the issue you are experiencing. Vivint processes motion events in the cloud. I believe they recommend that customers have a minimum upload speed of 2MBPS.
So what happens if an Alarm is triggered? If an event is detected, you will get an email and an instant push notification to your phone which you can swipe to open the Nest App. From the Nest App, you can see which sensor triggered the alarm, and you will be presented with two options: call the police or turn the alarm off. If you have a Nest Cam, you will be able to view footage from the event simultaneously. If you have multiple Nest Cams, you can swipe through to a view a live feed from all of your cameras. If you’re subscribed to Nest Aware, the Sightline feature will bookmark the event so next time you access your camera’s timeline, you’ll see a red bar. Tap on the red bar to review the footage of the event. Of course, while all of this is happening, your siren will sound.
The Ring Spotlight Cam Battery is ideal for users who want to monitor what's going on outside but don't want to be bothered with electrical wiring. Installation is a breeze, and with two battery packs installed you can get up to two years of power between charges. The Spotlight's motion sensor shined bright in testing, and the camera's 1080p day and night video was sharp. As with other Ring devices, the Spotlight can be integrated into a Wink or SmartThings home automation environment, and it works with IFTTT and Alexa voice commands as well as several other third-party devices. However, you have to subscribe to a Ring Protect plan to view and share recorded video.
For instance, you cannot use the contact or motion sensors to turn lights off and on, and the system doesn’t have the ability to adjust your smart thermostat when the system senses that you leave your home. The Ring Alarm system does use Z-Wave technology, which is a widely used standard with smart home devices; however, it doesn’t utilize this functionality as much as it could.
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.
×