Setup of Ring Alarm is quite simple, and the whole process only took me about half an hour, although I used the included adhesive strips to mount sensors and didn't mount the base station and keypad to my walls, so it would have taken a bit longer if I'd gone all-in with hardware mounting options. I may yet do that once I've decided for sure where I want to put the various components.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
After using Flex unplugged for a little over two weeks, the battery fell critically low before getting to the point where the camera would no longer turn on. I don’t blame this on the weather as much as I do the wind. Continued tests showed a battery life of 2-4 weeks. Per a reader request, I retested the camera in August. The weather is warmer here in August, it’s less windy, and Canary has since made several adjustments to help extend Flex’s battery life. This time, the battery lasted a full seven weeks.
Thanks!! One other question I have: my wife is due this fall and (in addition to a regular home security camera) I’m seeking a good baby video monitor, the best actually. Do you have a chart or column that compares and reviews baby video monitors? (I searched online and there’s an endless amount of options, and there’s also so many articles each one claiming this one is better or that one is better – but no one is nearly as good or trustworthy as you as far, and as far as breaking down each product and giving us the full truth and clarity there’s no equal to the job you have done! Do you have anything on this (baby video monitors)? If not yet, do you plan to? Thanks!
Thinking of your situation only….More than likely, you will need to buy an additional piece of hardware to upgrade your wired system to support newer technology, but it’s hard to say without more details. You might want to look into a device called Konnected. This would allow you to integrate your wired system with SmartThings which supports Ring cameras. You can read about that here. In my situation, they are not integrated, although most major home security companies now work with at least some third-party devices like Ring, Amazon Alexa, Google Home, August, etc.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.

The final alarm choice is Away, which engages all of your sensors by default and activates the external monitoring services as well. Much like with Home, you can opt to not include certain sensors if you want, and those settings are all controlled through the app. With both Home and Away modes, you can set an entry and exit delay, which is a buffer period that allows you to get in or out and disengage the alarm before the monitoring company calls.

After the hardware itself is set up, you can pretty much forget it's there, except for the keypad. You won't need to adjust the sensors regularly or clear alerts on them, everything you do from here on out is done via the app or keypad. It's worth noting that since the sensors aren't hardwired, you will need to change the battery at some point, though Ring says that the included batteries should last for up to three years with normal usage.

Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
Regardless of whether you go the adhesive or hardware route, Ring provides everything you need right in the box, with installation kits for each component of the system conveniently boxed and labeled to make it easy to find what you need. All you'll need if you want to use the included screws and anchors for hardware mounting are a screwdriver and a drill.
Given the plethora of user-friendly and accessible security systems out there, there’s no shortage of good options. One of our favorite systems comes from Ring, a global home security company owned by Amazon. While its offerings may not be as flashy as those from Nest, which was acquired by Google’s parent company Alphabet in 2014, Ring is a relatively simple and affordable home security option. Wi-Fi-enabled, it easily mounts on walls or flat surfaces and can be set up in less than an hour. Pair this with the company’s diverse product line and excellent customer service, and you have a system that will work hard for your home (without you having to work too hard yourself).
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.
×