Ring Alarm supports a sensor bypass mode, which allows you to arm the system even if one of the sensors is currently tripped. For example, if you want to arm the alarm but leave a monitored window open, the system will notify you upon arming that one of the sensors is currently faulted. You can choose to close the window to clear the sensor or bypass it, which will arm the system but not monitor that sensor until the next disarm/arm cycle.
The Spotlight Cam captures video at 1080p and has a 140-degree field of view, but lacks the pre-buffered recording capabilities that you get with Netgear's Arlo Pro 2 camera and the Ring Video Doorbell Pro. It uses four infrared LEDS to provide up to 30 feet of night vision and has a built-in 110dB siren, an 802.11n Wi-Fi radio, and a speaker and microphone for two-way audio. The spotlight itself consists of two strips on either side of the camera, each with four LEDs that provide an overall brightness of 700 lumens with a 4,000K color temperature. The camera comes with one battery pack, a mounting bracket, wall screws and anchors, a screwdriver and drill bit, and a setup guide.
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.
If motion detectors are placed in high traffic areas there batteries life will suffer commensurately. But this is an issue for ALL wireless motion detectors ! I have found Can work arounbd this using very precise location or use of two detectors in spots that preclude anyone entering house but dont rely on monitoring the owners most highly used traffic “lanes” in the house.
Tapping the Spotlight Cam icon in the Ring app opens a dedicated screen with all the camera’s controls laid out. The Ring app is one of the best in this regard, as it doesn’t require you to go hunting through nested settings menus to find what you need. At the top are on/off toggles for the camera’s lights and motion alerts. Using a selection of buttons below these, you can open the camera’s streaming feed, event history light settings, and more.
I own and use 4 Ring devices at my primary and secondary home. Until last night, I have been very pleased with the product. Last night, we had a heavy storm at our second home and the electricity was off for a period of time. My Nest devices automatically reconnected to my wifi as soon as the power was reestablished; not so with the Ring devices. Ring required my to physically be close to the devices with my iPhone in hand to reestablish the connection. This is a serious flaw for users like myself and one that Ring needs to correct if I am going to continue using their product. The electricity, and thus the wifi, at our mountain home loses power several times a year. I don't want to travel 700 miles just to reconnect a Ring device or two.