Oco Pro Cloud Video Surveillance Camera is easy Oco Pro Cloud Video Surveillance Camera is easy to use HD Wi-Fi camera with Cloud and SD card Recording for monitoring everything you care about: business home children pets elderly parents etc. No Monthly Fees required to access all camera features: Self-learning motion detection system helps Oco understand motion and ... More + Product Details Close
1. Nest can record continiously which eliminates the problem of sleepy security cameras. As far as Ring cameras, Ring Pro offers a pre-buffer. As far as their other cameras, I’ve only tried Ring Spotlight wireless. It’s a battery-powered camera and does not pre-buffer. I believe I heard that the wired version does pre-buffer, but I haven’t personally tried it.
Setup of Ring Alarm is quite simple, and the whole process only took me about half an hour, although I used the included adhesive strips to mount sensors and didn't mount the base station and keypad to my walls, so it would have taken a bit longer if I'd gone all-in with hardware mounting options. I may yet do that once I've decided for sure where I want to put the various components.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Thanks, Abe. I have a chart that compares Canary and Flex here: https://homealarmreport.com/canary-flex-security-camera-review/. I still prefer Canary All-in-One over Flex. Of course, it’s an indoor only camera so that might be a dealbreaker for you depending on how you want to use it. It has a better picture, already offers two-way audio (if you’re a Canary Member), has motion zones, and multiple air quality sensors.
After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
As you set up each piece, you're able to give it a name (like Front Door, Office Window, Main Hallway, etc), and then a location of where it is in your home, as well. Within the app, the devices are grouped by type, and the names that you give each piece is displayed to help you know what is what. While setting up the keypad you'll be asked to create a PIN number that you'll use to engage and disengage. If you have additional family members, once you share the new equipment with them in the app, you can set PIN numbers for them as well.
The Ring Alarm is controlled using the same mobile (Android and iOS) and web app as other Ring devices, such as the Ring Video Doorbell Pro, the Ring Floodlight Cam, and the Ring Spotlight Cam, but at the time of this review, the Alarm system does not interact with these (or any) Ring devices, nor can you pair it with just any Z-Wave or Zigbee device unless it is part of the Ring network, which is quite limited at this point.
The white base station is the brains of the system. It measures 1.4 by 6.6 by 6.6 inches (HWD) and has a 1.5-inch LED ring and a speaker on top, and a USB port and a LAN port around back, joined by a pairing button, a reset button, and Wi-Fi and power indicators. The base contains circuitry that supports numerous wireless protocols including dual-band 802.11n Wi-Fi, Z-Wave, Zigbee, Bluetooth 4.1, and LTE cellular as a backup if you subscribe to the Ring Protect Plus plan (more on this later). It also has an internal backup battery that will provide up to 24 hours of power in the event of a power loss, and a loud 105dB internal siren.
I’m leaning towards Arlo Pro 2 over the Arlo Q, due to the portability – however, since the portability is only a plus for me and not a must, is there any advantage that the Q has over the Pro 2 that I may want to consider before making my final decision. [I tried finding differences between the Arlo Q and Arlo Pro 2, and, aside from the design & portability, I was unable to find any.] If you know of any can you please share with me, and then I’ll be 100% certain in my decision:)
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
You will need robust wifi in your house to realize rings full potential/features, but thats true for ANY of its competitors. And for the mechanically challenged they make a plug and play wi fi extender (with a chime for the ring doorbell). NB rings monitoring fees are cheap and it’s hardware warranty very generous . Consider your all in costs over a ten year period -for me came out thousands of dollars less. Ring is owned by amazon so u know they will be there to honor warranty update software technical support etc this is such an easy purchase - no excuse for not having home security system anymore that you control and can customize, take with u when u move
You can also pay $10 per month for professional monitoring, but that’s it. There are no integrated carbon monoxide or fire alarms, and it’s not capable of syncing up with other smart home devices. This means you can’t control your lights, thermostat, locks, etc. The company says these are coming as the system grows and improves, but for now they’ll be missing if you buy the Ring Security System.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
And that is its job, to keep the camera charged. However, I noticed during testing that it does charge the battery too. When I installed the camera, the battery level was at 40%. Soon after connecting the solar panel, that percentage jumped to 50%. The next day it rained, and the percentage climbed from 50 to 52%. Day three was overcast, and yet the battery level crept up to 56%. Day 4 was a beautiful sunny day, and the battery level jumped to 78%. By the end of day 4, I was at 100%.