abode also sells their own line of cameras. They sell an image sensor, which will take three snapshots if it detects motion, and two streaming cameras. I’ve tested two of the three. The two cameras I tested were unfortunately unimpressive, and I found Nest cameras to be vastly superior. abode’s newest camera, not tested, offers two major benefits: FHD 1080P resolution and two-way audio. Of course, there’s also abode iota which offers the same camera specs as the newest abode streaming camera. The benefit of using abode cameras over Nest cameras is free cloud and local storage. abode’s streaming cameras support a microSD card and include three days of free cloud storage. Nest supplies just 3 hours of snapshot storage for free. As described above, if you want more Nest storage, you will need to pay for Nest Aware.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Two days later we had the Ring alarm and a Ring doorbell in hand. The whole setup took less than 20 minutes (including the doorbell). Plug in the parts, stick sensors to doors, use the app to walk through configuring them, and you're done. A few minutes later I had the professional monitoring set up. I spent a few minutes familiarizing myself with the features, adjusting alarm volume, adding user codes, etc. It was all just so seamless.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.