Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
If you have a dog or a cat, getting a home alarm that won’t be constantly triggered by Fido or Fifi’s movements is a real question you have to consider. The Ring Alarm claims that it won’t detect pets weighing under 50 pounds if the alarm is mounted above seven feet, while pet-friendly motion detection is already integrated into the Nest base station and door sensors.
Ring's Neighborhood is a cool feature that lets you share recorded events with neighbors who have joined the Neighborhood. You'll receive alerts when a neighbor posts a video and when there's fire and police activity in your neighborhood. The Events tab takes you to a screen where you can view a list of all camera and alarm events including sensor activity, arming and disarming times, and motion detection. Below the Neighbors and Events tabs are windows with live views of each installed Ring video doorbell and camera.
The camera connects to the included wall mount using a ball socket. If you’re installing on brick or another hard surface, you’ll need to drill and insert wall anchors. If you’re installing your camera onto a wooden surface, you can use the included screws and screwdriver to secure the mount. I wasn’t sure if I wanted to keep Spotlight Cam so both options seemed like rather permanent solutions. I decided to create the most unattractive, temporary solution.
Spotlight Cam’s star feature is its light. The camera is equipped with two lights that automatically trigger when motion is detected. The lights aren’t very bright. At 700 lumens, they’re about as bright as a 60-watt light bulb. It’s not enough to scare someone away, but does improve the camera’s ability to see at night. And nighttime is the only time when the lights will automatically turn on, though you can turn the lights on manually at any time. When triggered, the light stays on for about 30 seconds. When turned on manually, it stays on until you end the live stream (required to access light feature).
Since the Security Kit only comes with one detector and one sensor, you’ll likely need to invest in more sensors if you’re looking to cover any space with multiple access points. The advantage of the Ring contact sensors is that they work on both doors and windows, meaning you can easily swap them from one location to another as you configure your set-up. When triggered, the sensors will send instant alerts to your phone, letting you react in real time. While a little bigger than traditional sensors, these come in a bright white color, blending in with most door and window frames.
Ring finally unveiled its brand new security system in July and while their doorbell is tried and tested, the same can’t be said about their security system. Everything has to start somewhere, but it might not be worth risking your home security on a system that is bound to have some bugs and kinks to be worked out. When it comes to the safety of your family and home, you don’t want to take any chances. One great thing about this system is that they do offer monitored security, which is extremely important. It’s nice to be able to check up on things yourself, but it’s not your full time job to monitor your home. Leave it to pros who can monitor your home full time and who can immediately contact the authorities in the event of an emergency. Any home security system without this feature is honestly pretty worthless. Protect America also offers 24/7 professional monitoring.
The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
Although SimpliSafe's basic monitoring service goes for $14.99 per month for 24/7 monitoring, you have to pay an additional $10 more a month to control the system from your phone and to receive email and push notifications. Tack on another $4.99 per camera per month to record, download, and share video, and you're up to around $30 per month, which is three times what you'll pay for a Ring Protect Plus plan.
Ring's updated app (which will roll out to everyone in the coming weeks) brings lots of improvements for those invested in the ecosystem. You have quick and easy access from the main screen to the alarm features, as well as a glimpse of what your cameras are seeing. Things can be a little slow to load, depending how much equipment you have, but most of the time it works great.
Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
Once these motion-activated cameras pick up on movement, they’ll turn on their built-in floodlights, start recording, and send an alert to your connected mobile app. From there, you’ll be able to see and hear what’s going on via the camera feed, as well as speak through the cameras to whoever is on the property. You can also customize alert zones to narrow in on the most important areas for motion detection. All of this can be done from anywhere, which means you can keep an eye on your home even while you’re away.
The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
That said, using abode with a Nest Cam is my recommended solution, and integrating the two provides one major advantage: more free storage for your Nest Cams. The major disadvantage is that even if you are a Nest Aware subscriber, abode can only store snapshots. If you want video clips or continuous cloud access, you will need to pay for Nest Aware to access your footage via the Nest app.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.
Unfortunately, though I purchased the Solar Panel version, the camera did not ship with Solar Panel installation instructions. The Solar Panel itself had an instruction pamphlet, but it’s picture book style, which is not my favorite. I decided to ignore all instructions and guess at the install, which wasn’t a good idea. After installation, the camera’s video feed kept flickering in and out (a problem which I have yet to resolve) so I went back through my install steps to see if I had messed up along the way. I had. I found Solar Panel installation instructions online which I recommend and followed step-by-step.
With home and away modes, you're able to customize entry and exit delays up to two minutes before the alarm goes off, giving you enough time to leave the house after arming and enter the access code on the keypad upon returning home. When an event is detected, you'll get a notification on your phone, and the Ring app will display a countdown giving you the configured period of time to disarm the system before the alarm goes off. If you fail to enter the keypad code or disarm from the Ring app within the allowed time, the base station will emit a very loud beeping sound, and if you are signed up for professional monitoring, authorities will be notified.
I own and use 4 Ring devices at my primary and secondary home. Until last night, I have been very pleased with the product. Last night, we had a heavy storm at our second home and the electricity was off for a period of time. My Nest devices automatically reconnected to my wifi as soon as the power was reestablished; not so with the Ring devices. Ring required my to physically be close to the devices with my iPhone in hand to reestablish the connection. This is a serious flaw for users like myself and one that Ring needs to correct if I am going to continue using their product. The electricity, and thus the wifi, at our mountain home loses power several times a year. I don't want to travel 700 miles just to reconnect a Ring device or two.